Flow Measurement

Approx. Rs 25,500 / PieceGet Latest Price

Product BrochureProduct Details:

Electromagnetic flow meter suits for all kinds of liquids flow measuring such as electronic conductivity liquid, mud, and slurry etc. on the basis of its min. conductivity.

The result cannot be affected by temperature, pressure, viscosity, and density. It can also be used for measuring corrosive material as long as the right material has been chosen for the lining material.

Solid medium will not affect the result. Flow sensor and intelligent converter compact or separately compose a complete flow meter.

 

Benefits

• PLC/SCADA interface

• Field Programmable Interface

• Multipoint calibration for better accuracy

•  Detects air and stops flow measurement

Application
Flow measurement of liquids in process applications. Electromagnetic Flow meters for bidirectional measurement of liquids with a minimum conductivity of >5μs/cm

• Water, Waste Water
• Chemical
• Food
• Pharma
• Textile

Principle of Operation The operation of a magnetic Flow meter or Mag meter is based upon Faraday’s law, Which states that the voltage induced across any conductor as it moves at right angles through a magnetic field is proportional to the velocity of that conductor.

Approx. Rs 12,500 / PieceGet Latest Price

Product BrochureProduct Details:

CFI 100 are versatile flow indicators for measuring and totalizing flow variables. These indicators have 2 indicating modes, Rate of flow and Total Flow. Rate flow indication can be programmed for linear / square root / Lookuptable conversion. 2 Channel indicators are available which can display differential rate of flow as well as individual rate of flow. These indicators can be used for a wide variety of sensors like DP sensor, Ultrasonic Flow Transmitters, Magnetic Flow transmitters etc. Low voltage drop models are also available for connecting multiple indicators to the process loop. All indicators can provide upto 500mAof power at 18/24 V for sensors. Optional features include relay output and RS485/MODBUS outputs. A total of 4 setpoints can be programmed to operate 2 relays maximum. RS485 with MODBUS interface is available for connection to PLC's / computers. Batchmode operation is possible for batching applications. for about 5 years

Highlights

• Pulse Input / 4-20mA/ 0-5V Input (Factory Settable)

• 16 Character 2 line LCD display

• Rate of Flow / Total Flow Indication

• Programmable Relay outputs

• Batch mode operation

• Power for 2/3 wire transmitters

• 4-20mA and RS485 isolated outputs

• Square root extraction available

   

Benefits

• Batch Mode Operation

• PLC/SCADA interface

• Field Programmable Interface

• Suitable for orifice plate flow measurement

Advantages

• ± 0.05% Accuracy
• 2 wire / 3 wire compatible
• Rate of flow / Total Flow Indication
• 1Channel / 2 Channel
• Differential Indication
• Linear / Square root / Lookuptable Linearization
• 4½ Digit Display / 16 Character 2 line LCD display Backlit
• 4 Programmable Set-Points
• 1 or 2 Relay outputs
• 500mA Sensor Power supply from instrument

Approx. Rs 12,500 / UnitGet Latest Price

Product BrochureProduct Details:

The CFI 200 is a extremely rugged and versatile pulse input flow indicator. These indicators can be used for a wide variety of applications where accuracy and dependability are essential. These indicators accept pulse input. Two indicator modes are available Flow Rate and Total Flow. The Rate of Flow is shown in Line#1 and Total Flow in Line#2. In addition, all these instruments are field programmable and have nonvolatile backup memory that does not need cumbersome batteries. These instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms. These instruments are compact and can be easily mounted in a panel. These instruments have RS485 or RS 232 option for communication to PC.All the parameters are saved in a non volatile EEPROM memory which doesn't needs any external battery. There is a advanced power fail feature by which even if there is any power failure the Total Flow reading is automatically saved to memory and resumes with the same value after Power On. These meters can also be used for Batch operation. Here the total volume of liquid to be measured can be programmed and the instrument can switch OFF a relay automatically after the required batch is completez

Advantages

• +-1 % of full scale Accuracy
• Rate of Flow, Total Flow
• Microcontroller signal processing
• 5 digit LED’s indicates Rate of Flow
• 8 digit LED’s indicates Total Flow
• Programmable Relay Outputs
• Batch Mode Operation
• Variety of Sensor Fittings
• RS232/RS485 - MODBUS Communication
• Panel Mount, Table Top
• Field Programmable through four keys
• Compact Size
• Reed Switch input / Paddle wheel input

 

Approx. Rs 12,500 / PieceGet Latest Price

Product BrochureProduct Details:

CFI 100D instruments are Dual Channel Differential Reading instruments.CFI 100D measure and display the difference between the 2 flows in pipes. These instruments accept a voltage or current input and convert them to the programmed process variable. Settings are saved in non-volatile memory and no battery backup is required. The user can program two independent display modes. These instruments also have the capability to switch on the relay(s) based on user settings.

These outputs can be used for process set points and alarms, and for controlling pumps.
These instruments are panel mount. Optional features include: RS485 / MODBUS network protocol, Up to 2 relays can be programmed using 4 setpoints and current output of 4-20mA.

 

Benefits

• Diesel consumption measurement for engines

• PLC/SCADA interface

• Field Programmable Interface

• Cost-effective